RAID Reconstructor now FREE. Download newest version 4.30

RAID Reconstructor 4.30

Download Download Now   Buy Now Buy Now
Size: 2 MB $ 99.00 License: Shareware

RAID Reconstructor is a System Utilities::Other software developed by Runtime Software. After our trial and test, the software was found to be official, secure and free. Here is the official description for RAID Reconstructor: Recover data from a broken RAID Level 5 or 0 Array.
Runtime's RAID Reconstructor will help you to recover data from a broken RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives.

Even if you do not know the RAID parameters, such as drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in a virtual image, an image file, or on a physical drive.

Once you created an image you can use it for further data recovery processing with Runtime's GetDataBack. If you create the image on another physical drive, you can process it with GetDataBack too or you might even be able to directly boot from it.

RAID Reconstructor is read-only. It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping".

Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives.

The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.

RAID Reconstructor also runs from the Runtime Live CD or a WinPE boot CD-ROM.



..
Recover data from a broken RAID Level 5 or 0 Array.
Runtime's RAID Reconstructor will help you to recover data from a broken RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives.

Even if you do not know the RAID parameters, such as drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in a virtual image, an image file, or on a physical drive.

Once you created an image you can use it for further data recovery processing with Runtime's GetDataBack. If you create the image on another physical drive, you can process it with GetDataBack too or you might even be able to directly boot from it.

RAID Reconstructor is read-only. It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping".

Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives.

The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.

RAID Reconstructor also runs from the Runtime Live CD or a WinPE boot CD-ROM. you can download RAID Reconstructor 4.30 free now.


What's New in RAID Reconstructor 4.30

Improved RAID structure recognition

See more of RAID Reconstructor
Enlarge
↑ Report?
ad below
Platforms: Linux,Win2000,Win7 x32,Win7 x64,Win98,WinServer,WinVista,WinVista x64,WinXP
Publisher: About Runtime Software | Runtime Software titles | Visit Runtime Software | Country: USA
Downloads: 0 last month, 153 total
Last updated: More than a year ago ()
Requirements: 512 MB RAM, Disk controller card capable of handling all the drives in your RAID
Watch for updates:
Want to be notified when RAID Reconstructor is updated?

5 stars

Email a friend...
User Rating: NOT RATED
Rated by: 0 user(s)
      
Get the best software deals each week!

Deals

bottom

Get Weekly Deals

bottom
In Windows > System Utilities::Other Free Downloads
  1. 1TextPipe Standard 392811 downloads
  2. 2AnyChart JS Charts and Dashboards 45220 downloads
  3. 3Perfect Keyboard, Free Edition 27098 downloads
  4. 4ActivePresenter 13315 downloads
  5. 5MixPad Professional Audio Mixer 6996 downloads
  6. 6Prism Plus Edition 3340 downloads
  7. 7Switch Plus 2308 downloads
  8. 8TextPipe Engine 1997 downloads
  9. 9Ares Galaxy Turbo Booster 1714 downloads
  10. 10Trojan Remover 1335 downloads
bottom
In Windows > System Utilities::Other Top Freeware
bottom
In Windows > System Utilities::Other New Software
  1. 1Tansee iOS Message Transfer (Win) 1 year License
  2. 2Zeus IDE 214 downloads
  3. 3BurnInTest Professional 200 downloads
  4. 4Trojan Remover 1335 downloads
  5. 5Process Lasso 113 downloads
  6. 6Typeeto
  7. 7SIW 1042 downloads
  8. 8PerformanceTest 183 downloads
  9. 9Horas 149 downloads
  10. 10LogonExpert 1165 downloads
bottom